Precision. Power. Performance
VIVID (COB).
5Gb/s Single Cable Indoor Fine-Pitch MicroLED Display, 16:9
The latest generation of VIVID delivers superior display performance across the board: a wider colour range and deeper colour depth, richer contrast, and faster refresh rates than any LED Studio platform before it. A 20,000:1 contrast ratio and 16-bit HDR10/HLG colour hold detail in the deepest shadow and the brightest highlight alike, while frame rates up to 144Hz keep fast motion clean and free of ghosting. Underneath it all, a 5Gb/s single-cable signal means lower-latency transmission, ideal for the split-second demands of simulation and broadcast, backed by standard dual redundancy and multi-level calibration to keep every panel running true.
Key Features.
16-bit HDR10
HLG Colour
COB (Common Cathode)
≤20,000:1 Contrast Ratio
Ultra-Slim Profile: 28mm
Built Without Compromise
Whether you're specifying a broadcast studio, a flat-panel simulation or training environment, a control room, or another high-end indoor space where the image has to hold up from a metre away, VIVID is engineered to answer the brief that won't accept a trade-off. This is LED Studio's flagship platform: the same 5G flip-chip COB engineering behind every product on our roadmap, tuned to its highest setting across colour, contrast, motion and reliability, then backed by redundancy and calibration as standard, not an add-on. Nothing about VIVID is the accessible option. It's the one you specify when the image can't be allowed to fail.
16-bit HDR10/HLG Colour
Dual Power & Receiver-Card Redundancy As Standard
Single 5Gb/s Cable Transmission
20,000:1 contrast
One Cable.
Full Bandwidth
VIVID's new generation carries a full 5Gb/s signal down a single network cable, enough bandwidth for full resolution, full colour depth and full frame rate without the processor stacks and cable runs a high-performance wall used to need. The direct, single-cable signal chain also means lower latency between source and screen, a genuine advantage for simulation and broadcast, where every frame of delay is a frame the operator or the camera feels. Fewer cables means a cleaner install, fewer points of failure, and a signal chain that's easier to trace, troubleshoot and scale.
Chip On Board (COB).
Chip-on-Board (COB). Now Running at 5Gb bandwidth.
VIVID's new generation is built on LED Studio's most advanced Chip-on-Board platform yet: Flip Chip, Common Cathode pixel architecture combined with a 5Gb/s signal backbone. Embedding the pixel directly into the substrate strips away the extra component layers found in conventional SMD packages, and the flip-chip bond eliminates the fine bonding wires that limit both durability and drive precision. The result is a panel that runs cooler, drives colour more precisely, and now carries a full high-bandwidth signal down a single cable, all from the same engineering backbone.
Every layer of complexity we remove from the pixel-diode structure, is a layer of resistance, heat and signal noise removed from the module. VIVID's flip-chip COB construction keeps that structure as lean as COB technology will allow, the 5Gb signal then adds the bandwidth to drive it at full colour depth and the highest possible refresh rate, all via a single cable.
Learn about Pixel technologies.
16-bit HDR10 & HLG
Colour processing
16-bit HDR10 and HLG processing gives VIVID the grayscale precision to hold a gradient without banding and a highlight without clipping, whether it's a skin tone under studio lighting or a sunset rendered at full saturation. This isn't colour tuned to look good in a showroom; it's colour tuned to match what a camera, and an audience, actually expects to see.
20,000:1 Contrast Ratio
True black, right next to true brightness, on the same panel, in the same frame. VIVID's 20,000:1 contrast ratio means shadow detail stays visible without ever washing out the highlight beside it, the difference between an image that looks impressive and one that looks real.
Up To 144Hz Refresh Rate
Fast motion demands a fast panel. Up to 144Hz frame rates keep pans, transitions and live motion free of ghosting and trailing, whether it's a broadcast camera sweeping across the wall or content built to move fast on its own terms.
Dual Redundancy As Standard
On VIVID's new generation, redundancy isn't an optional extra you have to remember to specify, it's standard. Dual receiver-card and power-supply backup means a single component fault triggers an automatic failover, not a visible dropout. For broadcast, control-room and live-event environments where a blackout isn't an option, that's not a nice-to-have, it's the baseline.
Cool to the touch.
Last longer, run smarter, and use less energy.
A true marvel of intelligent design and groundbreaking pixel technology. Experience its cool-to-the-touch surface, and up to 40% reduction in energy consumption Vs traditional SMD technology, when run at 600 nits.
Thanks to its low BTU output, there's no need to cool the surrounding environment, translating to significant cost savings often overlooked, like air conditioning expenses. Elevate your displays while being environmentally and budget-conscious.
Cabinet Dimensions.
One Precision-Engineered 27" Cabinet.
With two cabinet sizes on offer, the VIVID allows for creative flexibility and maximises product placement in to complex install environments.
Fixed resolutions & custom sizes.
The VIVID can achieve familiar resolutions like 1080p, 4k UHD, 8K or custom arrays, shapes and sizes.
FHD - 1080p
4K UHD
Where can VIVID MicroLED be used?
Masterfully designed for the applications requiring exceptional image reproduction
Corporate Displays
Live Production & Broadcast
Retail Signage Screens
